Lube USA Positive Displacement Injector Electric Pump


This pump is small, low cost, and only for our original cartridge grease.

Power DC24V
Power Consumption 45.6W
Discharging Pressure 8MPa (Only for LHL System)
Maximum Discharging Time Below 7m 30s
Interval Time 3 times discharging time
Wiring Method Terminal connection
Manual Override Switch With (Optional: Only PDI system)
Grease Lever Switch With
Solenoid Cover Non combustible plastic (UL94-V0)
Protection Class IP54
CE Approval With
Pump Air Bleeding With restriction

Directions for use

  • Use recommended grease.
  • Never use molybdenum disulfide-contained grease.
  • Use lithium greases. (Contact us for consultation when other than lithium grease is used.)
  • Do not use any greases containing substances that attack brass and rubber.
  • When the cartridge is changed, pay attention that no foreign particles are getting inside.
  • Do not discharge continuously.
  • After changing the cartridge, bleed the air inside the pump by opening the air bleeding valve.

Click here to view the Lube USA Electric Pump - EGM II (pdf) catalog pages.