Lube USA Motor Driven Continuous Gear Pump

ACM-II • AMI-300 • AMI-1000

The ACM and AMI continuous delivery motor driven gear pumps deliver a relatively small amount of oil for lubrication from the distributor to the lubrication points. Do not use this system for any other purposes.

Specifications
  ACM-II
Pump Discharge Volume 60mℓ/min (50Hz)
70mℓ/min (60Hz)
Discharge Pressure 0.8MPa (safety valve setting)
Motor (other voltages available) Voltage/Current AC100V∅1/0.6A
(Condenser: 5µF)
AC200V∅3/0.3A
Output

30W
Induction motor

Operation Rate Continuous
Working Viscosity Range 32~1300mm2/S
Reservoir Capacity 2ℓ, 3ℓ, 4ℓ, 8ℓ (sheet metal)
Weight 4.0kg
Motor Rotary Direction Counter-clockwise
External Fuse 100V/1A
200V/0.5A
Specifications
  AMI-300
Pump Discharge Volume 300mℓ/min (50Hz)
330mℓ/min (60Hz)
Discharge Pressure 0.8MPa (safety valve setting)
Motor (other voltages available) Voltage/Current AC100V∅1/1.4A
(Condenser: 8µF)
AC200V∅3/0.35A
Output

50W
Induction motor

Operation Rate Continuous
Working Viscosity Range 65~1300mm2/S
Reservoir Capacity 2ℓ, 3ℓ, 4ℓ, 8ℓ (sheet metal)
Weight 4.4kg
Motor Rotary Direction Clockwise
External Fuse 100V/2A
200V/1A
Specifications
  AMI-1000
Pump Discharge Volume 1000mℓ/min (50Hz)
1100mℓ/min (60Hz)
Discharge Pressure 0.8MPa (safety valve setting)
Motor (other voltages available) Voltage/Current AC100V∅1/2.0A
(Condenser: 12µF)
AC200V∅3/0.8A
Output

75W
Induction motor

Operation Rate Continuous
Working Viscosity Range 65~1300mm2/S
Reservoir Capacity 2ℓ, 3ℓ, 4ℓ, 8ℓ (sheet metal)
Weight 7.1kg
Motor Rotary Direction Counter-clockwise
External Fuse 100V/3A
200V/1A

Directions for use

  • Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table.
  • Do not use any special additive-contained oil, water soluble oil and solvent.
  • Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change.
  • Make sure that proper voltage is applied.
  • Do not over tighten the discharge joint. Refer to the tightening torque table.

Click here to view the Lube USA Gear Pump - ACM (pdf) catalog pages.

Login