Bijur Delimon MultiPort II Lubricator
Mobile, PDI, Grease
GENERAL
The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with positive displacement injector (PDI) systems. The pump has two combined pumping elements at the left and center positions, with a PDI kit at the left position and a return at the right position. Pump outlet is located at the left for direct feed to the injectors. Lubricators are available with 12 & 24 VDC motors, which make them ideal for use in mobile applications. An integral controller is available, or the pump can be controlled by an external controller (such as SMDC) or by the customer’s PLC/DCS/ etc.
OPERATION
Power supplied to a motor with gear box drives a precision eccentric cam which engages with the spring load piston elements. This action creates a suction and pressure stroke of the element(s), thereby displacing a fixed volume of lubricant through an outlet check valve. Lubricant is discharged through main line tubing to a series of positive displacement injectors and on to multiple lubrication points. The lubricator also includes a solenoid operated vent valve which relieves mainline pressure when the pump motor stops, allowing injectors to reset for the next cycle.
FEATURES
- Compact rugged design
- Minimal maintenance required
- High and low pressure capabilities
- Ability to operate in harsh conditions
- Integral controller available
- Low Level Switch option available
Adding a Bijur Delimon lubrication system increases equipment life by decreasing wear on vital components. The MultiPort II also protects your employees by eliminating the need for manually applying lubricant while in operation.
TECHNICAL DATA
Lubricator
| Reservoir Capacity | 3 liter (7 lb) or 7 liter (15 lb) | |
| Grease1 | 24VDC | NLGI grade 000-2 |
| 12VDC | NLGI grade 000-0 | |
| Maximum Working Pressure | 24VDC 200 bar (2900 psi) / 12VDC 60 bar (870 psi) | |
| Output/ min. | 6.0 cc (0.36 cu. in.) | |
| Discharge Element Output Port | 1/4" NPT(F) or 1/4”BSPP(F) | |
| Operating Temperature Range1 | -4ºF to 122ºF (-20ºC to 50ºC) | |
| Operating Voltage | 12 or 24 VDC | |
| Motor2 | 24VDC (2 amp) / 12VDC (4 amp) | |
| Controller Fuse | 24VDC 5 amp / 12VDC 8 amp | |
| Enclosure Rating | IP-66 | |
| Low Level Switch | Capacitive Prox Switch, DC NPN, 10-36DC, Normally Closed (N.C.) | |
| Fill Connection | Quick disconnect or Zerk | |
| Lubricator Weight with Reservoir | 3L 25 lbs / 7L 28 lbs (3L 11.3 Kg / 7L 12.7 Kg) | |
| 1 Lubricant must be pumpable at the operating temperature. Contact lubricant manufacturer with specific questions. 2 Operates at 40 rpm @ 68°F, 1000 psi back pressure. |
||
Refer to the following datasheets:
- Datasheet #36750: MultiPort II PDI
- Catalog #414: ExactoServe Systems
- Datasheet #35549: GXL Injectors
- Datasheet #46911: SMDC Controller
- Datasheet #35482: CXL2 Injectors
- Datasheet #35744: Manual Fill Pumps
HOW TO ORDER
Note: Items in BOLD are standard options. Other options may have longer lead time.
ACCESSORIES
| Description | Part # | Photo | |
| Low Level Switch Kit | 3 Liter | 55536-1FB |  |
| 7 Liter | 55536-3FB | ||
| Pressure gauge (Dual scale 0-2000 psi/0-140 bar, 1/8” NPT, LM) |
U902J |  |
|
| (Dual scale 0-5000 psi/0-350 bar, 1/4” NPT, LM) |
U902F | ||
| Field-Wireable DIN Plug w/Gasket 55659 |
55892 |  |
|
| DIN Blank Plug (to cover unused terminals) |
55625 |  |
|
| Pump Mounting Plate | 55389 |  |
|
| Mating Fill Connector for Universal Fill Plug 1/4"NPT(F) |
UX43521 |  |
|
| Mating Fill Connector for Universal Fill Plug 1/4"BSPP(F) |
734142583* | ||
| Manual Fill Pump | 35 lb. Pail | 37304 |  |
| 120 lb. keg | 37303 | ||
| Pressure Switch w/DIN |
Low Pressure 600 pdi / 41 bar |
35859-1 |  |
| High Pressure 2000 psi / 137 bar |
35859 | ||
| *Use with Copper Seal 35010 | |||
SERVICE PARTS
| Item | Description | Part # | Qty. | |
| 1 | Nut | 37915 | 3 | |
| 2 | Washer | 22076-5S | 3 | |
| 3 | Tie rod: for 3 liter (7 lb.) | 44460-4 | 3 | |
| Tie rod: for 7 liter (15 lb.) | 44460-6 | 3 | ||
| 4 | Reservoir: 3 liter (7 lb.) | 55535-1FB | 1 | |
| Reservoir: 7 liter (15 lb.) | 55535-3FB | 1 | ||
| 5 | O-ring | 45831-1 | 1 | |
| 6 | DIN Cable (not shown) 2 | 35732-1 | 2 | |
| 7 | Motor cover screw | 22081-17S | 8 | |
| 8 | Motor cover non-control | 55558-3 | 1 | |
| Motor cover w/controller 24VDC | 55558-1 | 1 | ||
| Motor cover w/controller 12VDC | 55558-2 | 1 | ||
| 9 | Motor cover gasket | 66245 | 1 | |
| 10 | Motor (24 VDC) & worm gear | 31703-1 | 1 | |
| Motor (12 VDC) & worm gear | 31703-2 | 1 | ||
| 11 | Standard pump element w/o relief valve | 55480 | 1 | |
| 12 | Copper seal | 25589-5 | 1 | |
| 13 | Copper seal | 25589-7 | 1 | |
| 14 | Relief Valve LP 60 bar (870 psi) Relief Valve HP 200 bar (2900 psi) |
55660-L 55660-H |
1 1 |
|
| 15 | Mixing arm with wiper | 55534 | 1 | |
| 16 | Grease fill fitting 1 | 52043 | 1 | |
| 17 | Cap | 53160 | 1 | |
| 18 | Controller Fuse 5 amp (24VDC) (not shown) | 31076-2 | 1 | |
| Controller Fuse 8 amp (12VDC) (not shown) | 31076-4 | 1 | ||
| 19 | Bearing | 25101-2 | 1 | |
| 20 | Shaft seal | 22178-6 | 1 | |
| 21 | Shaft key | 25104-6 | 1 | |
| 22 | Window | 66243 | 1 | |
| 23 | Window gasket | 66246 | 1 | |
| 24 | LLS DIN Cable (not shown) 3 | 55865-3 | 1 | |
| 25 | Low Level Switch Kit | 3 Liter | 55536-1FB | 1 |
| 7 Liter | 55536-3FB | 1 | ||
| 26 | Cartridge Valve | 37637 | 37637 | 1 |
| 27 | Coil | 12VDC | 37635 | 1 |
| 24VDC | 37636 | 1 | ||
| 28 | Coil DIN /Deutsch Cable (not shown) | 55811 | 1 | |
| 29 | Socket Head Screw 4 | 55926 | 4 | |
|
1 Mating connector is UX43521. |
||||
DIMENSIONAL SCHEMATICS
Measurements shown in millimeters.
'L' Dimensions
| Description | "L" | |
| With Low Level Switch | 3 Liter (7 lb.) | 456 |
| 7 Liter (15 lb.) | 656 | |
| Without Low Level Switch | 3 Liter (7 lb.) | 419 |
| 7 Liter (15 lb.) | 619 | |
