Bijur Delimon SureFire II Lubricator
Automatic, Oil & Fluid Grease, Single Phase
FEATURES & BENEFITS
- PDI version handles oil and fluid greases
- SLR version handles oil
- Low level switch for fail safe operation
- Lubrication outlet connections on either side for easy installations
- Plastic and metal reservoirs available
- Convenient terminal block provides fault-free electrical connections
- Large capacity fill cap with built-in strainer minimizes contamination
- Three integral control options available; On-Off Timer, Lite Controller, and Premium Controller
- Also available without integral control, for operation via customer PLC, DCS, etc.
GENERAL
The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven gear pump that can adapt to a broad range of production machinery. The PDI version can handle oil or fluid grease for single injectors or injector groups serving up to 100 lubrication points. The SLR version uses oil to supply resistance fittings or resistance fittings groups serving up to 100 lubrication points. The SureFire pump’s versatility also allows it to perform with other lubrication system types and multiple applications.
PDI OPERATION
The SureFire II PDI Lubricator has a motor-driven pump that pulls lubricant in from the reservoir and delivers pressurized lubricant to the distribution network through the outlet(s) in the top plate. Pressurizing the distribution network forces all of the positive displacement injectors (PDIs) in the system to fire, discharging the lubricant that was stored in each of their discharge chambers during the last pump cycle.
Once all of the PDIs discharge, the pressure in the network continues to rise until the limit in the pressure switch is reached. Once this limit is reached, a pressure switch could be used to stop the motor, and momentary pressure in the distribution network becomes greater than the pressure at the outlet side of the gear pump. This pressure differential actuates a quick dump valve which relieves the distribution line pressure back into the reservoir.
SLR OPERATION
The SureFire SLR Lubricator has a motor-driven pump that pulls oil in from the reservoir and delivers pressurized oil to the distribution network through the outlet(s) in the top plate. Pressurizing the distribution network forces all of the resistance fittings in the system to discharge the oil in proportioned quantities to the friction points. The resistance fittings continue to flow and the pump builds pressure until pressure relief valve setting is reached (75 psi/5 bar). Once the motor is shut off, pressure in the distribution network returns to near 0 psi. This actuates a quick dump valve which relieves the line pressure back into the reservoir.
TECHNICAL DATA
Output Volume – 115 VAC, 230 VAC (max.) | 250cc/min @ 60 Hz 210cc/min @ 50 Hz |
|
Output Volume – 24 VDC (max.) | 250cc/min | |
Output Pressure (max.) | PDI | 450 psi (31 bar) |
SLR | 75 psi (5 bar) | |
Pressure Switch Setting 1 | PDI | Closes at 290 psi (20 bar) |
SLR | Closes at 20 psi (1.4 bar) | |
Lubricant Viscosity | Standard Oil version: 20 to 1500 cSt @ operating temperature | |
Light Oil version: 5-40 cSt @ operating temperature | ||
Soft Greases 2 | NLGI grade 000 - NLGI grade 00 (40,000 cSt max) |
|
Reservoir Fill Screen (oil only) | 40 mesh, removable | |
Reservoir Volume | 2 liter 3 liter 6.0 liter 12.0 liter |
|
Reservoir Material | Luran (Blue Tint) for 2, 3 and 6 liter Steel for 2, 3, 6 and 12.0 liter |
|
Motor Voltage Options | 100/115 VAC 50/60 Hz 200/230 VAC 50/60 Hz (single-phase) 24 VDC |
|
Motor Power Requirements 3 | 100/115 VAC | 1.0 amps |
200/230 VAC (single-phase) | 0.70 amps | |
24 VDC | 2.4 amps | |
Operating Temperature Range | 40°F through 105°F (5°C through 40°C) | |
IP Enclosure Rating | IP-54 | |
Electrical Fitting | Liquid tight | |
Output Connection (x2, one each side) | G 1/4 BSPP | |
Return Line Connection | G 1/4 BSPP | |
Single (main) Feed Line | 6mm O.D. minimum recommended | |
1 PDI: External end-of-line pressure switch also available (part #26772-2; 225 psi). SLR: External end-of-line pressure switch also available (part #26641-2; 55 psi). 2 PDI version only. Please contact a Bijur representative for applications using soft grease. 3 Motor Overload Protection needs to be provided by the host machine and/or its control system.f |